If your DPF warning light is on, you may not need an expensive replacement from the dealer. At 30 Minute DPF Clean, we serve diesel owners across Greater New Jersey with hydraulic DPF cleaning that removes 98% of soot within an hour.
Your diesel engine has a particulate filter that traps soot from the exhaust. When it gets clogged, your dashboard signals you in three stages. Knowing which stage you are at determines the right fix and helps you act before the situation gets worse.
1
When the soot load reaches around 45%, the DPF warning light stays on. Your engine is trying active regeneration but failing to complete it. This is usually because of too many short city trips. A 20-minute drive on the highway at 60 mph or more may clear it. If it does not, call us.
2
When the DPF light and the engine management light turn on together, the filter is severely blocked. The ECU has logged fault codes such as P2002 and P2463, and forced regeneration has failed. At this stage professional cleaning is required immediately.
3
The engine power is cut to protect the turbocharger and other engine parts. The blocked filter is putting serious stress on the system. Stop driving right away and call us before the damage gets worse.
From light diesel passenger cars to heavy commercial trucks, we know DPF systems inside and out. Here are some of the most common vehicles we service every day.
Error Codes: P2463 · P2002 · P2458
Error Codes: P242F · P2002
Timely professional cleaning can help you avoid expensive dealer replacements and get your engine running strong again.
We are transparent about what you pay and what we do. Every step below is included in your single service price starting at $179. No hidden fees, no surprise add-ons.

Walk into our Clarksboro, NJ shop with no appointment needed, or ship your DPF to us. We confirm receipt the same day.
(Day1)

We read fault codes, check soot and ash levels, and test pressure sensors before touching the filter. No guesswork.
(15 Minutes)

Unlike oven baking which takes 12 hours and risks cracking the filter, our hydraulic method is faster, safer, and reaches areas other approaches miss entirely.
(Under 30 Min)

Air flush, flow test, and a full functionality check confirm the filter is performing like new. Every clean comes with a 3-month guarantee.
(Full Guarantee)
★★★★★
Our state-of-the-art hydraulic cleaning outperforms air knife methods and does not require a 12-hour bake or risk cracking your filter. Our advanced process removes up to 98% of soot and ash, restoring filter performance quickly and efficiently.
Baking in the oven takes more than 12 hours and can crack your ceramic filter. Our hydraulic method is faster, safer, and cleans deep into areas other methods miss entirely.
Dealers push you toward a new DPF costing more than $1,800. We restore almost all blocked filters for a fraction of that price with the same end result.
We started in truckload freight and expanded into DPF servicing. We understand diesel engines thoroughly, not just how to clean filters.
Not in New Jersey? Remove your DPF and ship it to us. We return it cleaned, tested, and guaranteed. Pickup and delivery are also available within 30 miles.
We at 30 Minute DPF Clean quickly and affordably clean your diesel particulate filter in Greater New Jersey. Walk-ins are welcome and no appointment is needed.
At Stage 1, a short motorway drive at 60 mph or above for 20 minutes may resolve it. At Stage 2, where the warning light is flashing alongside the engine management light, stop driving and get it cleaned immediately. At Stage 3 where the vehicle is in limp mode, stop the vehicle right away and call us.
A professional DPF cleaning solution removes accumulated soot and ash using our hydraulic process, restoring your existing filter to near-new performance. Replacement means installing a brand new filter at $1,800 or more. We can restore almost every clogged filter and cleaning is nearly always the right first step.
Recurring blockages usually happen when the vehicle is used mainly for short city trips that do not allow full regeneration. They can also be caused by a faulty EGR valve or oil contaminating the filter. Regular professional cleaning every 6 to 8 months and occasional longer drives at highway speed help prevent buildup.
Yes. Our diesel DPF cleaner service covers all commercial trucks including Freightliner, Kenworth, Peterbilt, Volvo, and all Cummins and Detroit diesel platforms. We understand the specific DPF systems on each of these trucks and service them the same day in most cases.
Most filters are cleaned in under 30 minutes in the shop. From drop-off to driving away, the whole process including the diagnostic scan and post-clean flow test takes under 60 minutes.
When both the DPF warning light and the engine management light are on at the same time, the ECU has logged fault codes such as P2002 or P2463, and active regeneration has failed. This is Stage 2. Professional cleaning is needed right away to prevent further damage to the turbocharger and surrounding components.
Walk-ins are always welcome. If you’re on a tight schedule, call ahead and we’ll prioritize your order to get you in and out as fast as possible.
We’ll get back to you within 1 business hour.
See exactly how our advanced hydraulic cleaning system removes 98% of soot and ash from clogged diesel particulate filters — in as little as 30 minutes.
© 2025 30 Minute DPF Clean · 179 W Cohawkin Rd, Clarksboro NJ 08020